PCB assembly

Populated boards, inspected and ready to power up.

Bare boards and assembly under one order. Send your Gerbers, BOM and placement file — we handle parts, stencil, soldering and inspection.

Parts sourcing

Use our supply chain, yours, or both.

We buy every part on your BOM from authorised distributors, flag long-lead or obsolete items and propose alternates for your approval.

You ship the parts, we build. Send a small overage on reels and cut tape to cover machine setup and pick-up losses.

We source the commodity parts, you supply the special or pre-programmed ones. One BOM, clearly marked.

On the line

01
Solder paste
Laser-cut stencil prints paste, then solder paste inspection checks volume and position.
02
Placement
Pick-and-place machines set parts from 0201 up to large connectors and shields.
03
Reflow
A profiled reflow oven, tuned to your board mass and the parts on it.
04
Through-hole
Selective or hand soldering for connectors and power parts.
05
Inspection
AOI on every board, X-ray on BGA and QFN, visual QC against your assembly drawing.
06
Test and pack
Programming and functional test if requested, then ESD-safe packing.

Assembly capabilities

PCB assembly capabilities
Assembly type	SMT, single or double-sided Through-hole (manual and selective) Mixed technology
Smallest package	0201 passives
Fine pitch	0.35 mm pitch QFN / QFP, 0.4 mm pitch BGA
Board size for SMT	10 × 10 mm to 460 × 400 mm (smaller boards panelized)
Board thickness for SMT	0.6 – 3.0 mm
Component sourcing	Turnkey (we source) Consigned (you supply) Partial / mixed
Inspection	Solder paste inspection AOI on every board X-ray for BGA and bottom-terminated parts
Testing	Visual QC Functional test with your fixture or procedure
Stencil	Laser-cut stainless steel, framed or frameless
Order size	From 2 assembled boards to production volumes

Upload your Gerbers and get an engineer-reviewed quote, usually within one business day.